Tam Valley HFJ003U DCC Hex Frog Juicer (Scale=ALL) TAM-HFJ003U

Tam Valley HFJ003U DCC Hex Frog Juicer  (Scale=ALL) TAM-HFJ003U For DCC systems 2 Amps to 8 Amps including NCE PowerCab.  This board can be configured to use as an automatic polarity reverser for six frogs, or a reverser for one to three...

Tam Valley CFJ003U DCC Circuit Breaker (Scale=ALL) TAM-CFJ003U

Tam Valley CFJ003U DCC Circuit Breaker (Scale=ALL) TAM-CFJ003U Perfect Protection for your Frog Juicers!This is the same board as the Dual Frog Juicer but confugured to work as a circuit breaker.  When there is a short it will cut off both...

Tam Valley DFJ003U DCC Dual Frog Juicer (Scale=ALL) TAM-DFJ003U

Tam Valley DFJ003U DCC Dual Frog Juicer (Scale=ALL) TAM-DFJ003U For all DCC systems including NCE PowerCab.  This board can be configured to use as an automatic polarity reverser for two frogs, a reversing loop, a turntable, a wye, or a crossing...

Tam Valley MFJ003U DCC Mono Frog Juicer (polarity reverser for frogs) (Scale=ALL) TAM-MFJ003U

Tam Valley MFJ003U DCC Mono Frog Juicer (polarity reverser for frogs) (Scale=ALL) TAM-MFJ003U For all DCC systems including NCE PowerCab.  This board is an automatic polarity reverser for a single frog.  Setup is simple, connect two wires to...

BXPA1 Digitrax / Loconet DCC Auto-Reverser with Detection, Transponding & Power Management (Scale = ALL) Part # 245-BXPA1

BXPA1 Digitrax / Loconet DCC Auto-Reverser with Detection, Transponding & Power Management  (Scale = ALL)  Part # 245-BXPA1 The BXPA1 is a combination DCC Auto-Revereser, occupancy detector, Transponding detector, and intelligent power...

5400 Circuitron / AR-1 Automatic automatic polarity reverser that is ideally suited for use with point to point layouts part# = 800-5400

(ALL SCALES) AR-1 AUTOMATIC REVERSE CIRCUIT The CIRCUITRON AR-1is a basic automatic polarity reverser that is ideally suited for use with point to point layouts, displays, test tracks or reverse loop setups. The AR-1 utilizes an integrated circuit...

5401 AR-2 Circuitron / AUTOMATIC REVERSE CIRCUIT WITH ADJUSTABLE DELAY Part # 800-5401

AR-2 AUTOMATICREVERSECIRCUIT WITH ADJUSTABLE DELAY The CIRCUITRON AR-2is a sophisticated, integrated circuit design,automatic polarity reverser for use on point to point layouts in any scale. The AR-2 provides a 5 amp reversing capacity and also...

Digitrax AR1 Auto Reverser for DCC Layouts (Scale = ALL) Part # 245-AR1

Digitrax AR1 Auto Reverser for DCC Layouts  (Scale = ALL)  Part # 245-AR1 NOTE - AR1 is a mechanical relay if you are using a newer system please look at the BXPA1 which is the newer solid state auto reverser.  The AR1 may not work fast...