Tam Valley DFJ003U DCC Dual Frog Juicer (Scale=ALL) TAM-DFJ003U
Tam Valley DFJ003U DCC Dual Frog Juicer (Scale=ALL) TAM-DFJ003U is backordered and will ship as soon as it is back in stock.
Couldn't load pickup availability
Tam Valley DFJ003U DCC Dual Frog Juicer (Scale=ALL) TAM-DFJ003U
Description
Description
Tam Valley DFJ003U DCC Dual Frog Juicer (Scale=ALL) TAM-DFJ003U
For all DCC systems including NCE PowerCab. This board can be configured to use as an automatic polarity reverser for two frogs, a reversing loop, a turntable, a wye, or a crossing. It uses the same basic design as the hex frog juicer but has 33 Amp transistors so it can be used with multi-unit lashups and 10 Amp boosters. Setup is simple, connect the input to the DCC track bus, and connect the output wires either to two frogs or two rails. A jumper controls whether the two outputs act as a pair (i.e. an auto-reverser) or independently (i.e. a pair of frog juicers). Another pair of jumpers controls the current set point for switching, either 2 Amps or 4 Amps. When used for frogs or crossings generally 2 Amps work best and for an auto-reversing application, 4 Amps generally works best.
|
Please note - Frog Juicers are DCC (Digital Command Control) devices ONLY. They will not work with DC or 3-rail. They will work with most all DCC systems, Lenz, Roco, NCE (including the PowerCab), Digitrax, Zymo, MRC, CVP. If you don't see your DCC system here, don't worry, there are just too many to list them all! Alas, they will not work with the Bachmann EZ-DCC system or the SPROG II as they do not have enough power to reach the 1.7 Amp switching threshold. However, if you use one or our boosters then you can use frog juicers and other auto-reversers with these systems. |
Peco Electrofrog Update- All Frog Juicers work with Peco electrofrog turnouts without any modification to the Peco turnout. The same applies to other power-routing turnouts (e.g. older Shinoharas). You still need to insulate the Peco electrofrog turnouts as in the instructions that come with the turnout. For a normal turnout, that mans using insulated rail joiners on the 2 rails leaving the frog. Peco Insulfrogs do not need a frog juicer as the frog is plastic and cannot be powered. |
Specifications
Specifications
-
Scale-
-
Product Type-
-
Height
-
Width
-
Depth
